Car Washes

Pay Stations, Pay Stations and Pay Stations

Deja Vu if you've heard this before and from this fine car wash location a mile high in Utah. Quick & Clean car wash located in Clearfield, Ogden and Clinton Utah just made major improvements by updating their pay stations and their Point of Sale at their Clinton and Ogden locations.

Quick & Clean replaced their old pay stations and Point of Sale at their Ogden, Utah location with two new Unitec Sentinels and a Saleslink POS. At their Clinton, Utah location we installed two Unitec Sentinel's and a Portal Ti+ to work in conjunction with their In-Bay-Automatic and a Saleslink POS. We also installed Washlink Systems Gate Controller at the Clinton location.

 

Now with all their sites having Saleslink POS and our replication process, all the Quick & Clean sites have been unified.

We appreciate Quick & Clean’s trust in us to be their car wash automation, POS and paystation solution.

Another ISI to Washlink Conversion

The Washlink installation team of Mike Jensen and Jay Japka spent time at Splash Express car wash in Union Gap, Washington, converting a now unsupported ISI WashSoft system to a full Saleslink POS system and the installation of a Washlink gate controller.

In with the new (Saleslink) out with the old (ISI). Installers Jay Japka and Mike Jensen. (Saleslink Express terminal in between the guys)

In with the new (Saleslink) out with the old (ISI). Installers Jay Japka and Mike Jensen. (Saleslink Express terminal in between the guys)

Mike Jensen custom wires a Washlink gate controller to Splash's RTC and Unitec Pay Stations.

Mike Jensen custom wires a Washlink gate controller to Splash's RTC and Unitec Pay Stations.

Retired ISI WashSoft (left) replaced by Saleslink POS (right). Owner Burk Morgan deep into setting up his new system. The simpler Washlink POS enabled Burk to get started immediately after setup. (Notice the Washlink Systems mouse pad. The only thin…

Retired ISI WashSoft (left) replaced by Saleslink POS (right). Owner Burk Morgan deep into setting up his new system. The simpler Washlink POS enabled Burk to get started immediately after setup. (Notice the Washlink Systems mouse pad. The only thing still operational on the ISI system.)

Welcome to the Washlink Systems family Burk and your Splash Express team.

With the new gate controller and Saleslink POS installed (using Splash's excising Unitec Sentinels) the installation was as clean as the cars.

Splash Express is definitely Yakima's favorite car wash. And now is improved with a new advanced Washlink gate controller that the employee's love using.  

ISI WashSoft to Saleslink Conversion

H20 Carwash in Highland Ranch, CO.

The Washlink Systems team was asked by Hayden Shamburger head coach of H20 carwash in beautiful Highlands Ranch, Colorado to convert their dated and unsupported ISI WashSoft POS to our vastly advanced Saleslink POS. We were also asked to add a Saleslink Stacker Controller to H2O's excisting Kesseltronics RTU, improving reliability and simplifying employees ability to stack vehicles.

First project was to update the Unitec C-Start pay station to the most current version.

As the storm rages on, the WLS team works inside diligently converting the ISI system to Saleslink.

Just as we were making major progress on the conversion, a huge spring snow storm hit. While the storm was raging outside the WLS team was inside working on the conversion.

As the storm passed the WLS team was ready for testing.

Coach Hayden deeply involved with training.

Though very challenging, our goal was to use all the existing and previously installed ISI hardware to work with our Saleslink software, saving H2O significant dollars.  Converting the ISI WashSoft system to our Saleslink project consisted of the following.

  1. Installing a Saleslink Stacker to operate in code mode.
  2. Connect the Saleslink Stacker Controller to a Kesseltronics RTU.
  3. Update the Unitec C-Start to the most current software version.
  4. Program the C-Start to allow for upgrades from RFID tag and Rain X or one of 3 full service options.
  5. Get the existing traffic signal working correctly with the controller.
  6. Program the C-Start to automatically close a transaction and print receipt if RFID customer does not buy or upgrade within 30 seconds.
  7. Install Saleslink POS.
  8. Update all excising ISI sales terminals with Saleslink POS.
  9.  Connect all existing printers, scanners and cash drawers to function correctly with Saleslink.

During the storm the controller was being rewired to our high standards. This picture shows what it looked like prior to the rewiring.

Steve trains the H2O staff on how their new Saleslink Stacker works.

Washlink Systems can proudly say we're completely experienced in converting the discontinued and unsupported ISI WashSoft car wash program to a completely fully functioning Saleslink System on excisting ISI hardware. If you are now using an ISI system and are concerned with your future with ISI WashSoft please contact us and we'll guide you through the process of converting to Saleslink.

Tagg-N-Go St. George, Utah

Visually stunning tunnel

WOW what can Washlink Systems say about Tagg-N-Go’s Quinn Allgood and Conner Atkin. These two young men have built one of the most beautiful and inspiring car washes in the southwest. Located in beautiful St. George Utah in the southern portion of the state, the car wash blends seamlessly in with the environment. These two guys did their homework and built an extraordinary car wash. Washlink Systems is pleased to partner with them with a full suite of Washlink Systems products.  

Tagg-N-Go is extremely attractive

Conner and Quinn’s vision of using automation and modern technologies to wash cars is Washlink Systems dream partner.

The Tagg-N-Go team envisions that everyone of their customers will notice the quality and speed of their wash and  purchase an unlimited wash package (requiring an RFID tag(g)) at a super reasonable price. Quinn and Conner with the help of the Automate car wash installation team choose Washlink Systems in implementing their vision.  

3 Unitec Sentinels pay stations with WLS RFID's

The following Washlink Systems equipment and software was instrumental in automating the Tagg-N-Go car wash and fulfilling their vision.  

  • Full Suite of Washlink Systems Software including Saleslink POS
  • 10” Saleslink Terminal including BioMetric reader and Cash drawer
  • 2 Voyager Tablets with printer base
  • 3 Unitec Sentinel Pay Stations
  • 3 Washlink RFID’s
  • 3 Washlink Gate Controllers
  • Washlink MCC and VFD’s
  • 12” Touch Screen
  • And a variety of other equipment

Sincerely from the Washlink Systems team, we wish Conner and Quinn great success and additional Tagg-N-Go car washes.

Quick & Clean Car Wash

Washlink Systems team members Micah Smith and Jay Japka were honored last week to install a complete package of Washlink Systems equipment and suite of products at Quick & Clean #3 in Clearfield, Utah. Quick & Clean is a state of the art car wash operation located in the beautiful and sunny yet cold (12° to 34°) Ogden, Clinton and their newest site Clearfield, Utah.

The following is a list of some of the custom designed equipment and programing especially designed to Quick & Clean's requirements. This makes Quick & Clean #3 the most sophisticated car wash in their area.

  Two Unitec Sentinel pay stations at sunrise

  • Saleslink Systems Point of Sale system, custom designed to Quick & Clean’s requirements.
  • Two Washlink Systems integrated Unitec Sentinel pay stations, specifically programed for Quick & Clean.  
  • One Independent RFID only lane where no pay station is required for Quick & Clean’s unlimited customers.
  • Washlink Systems Multi Lane Traffic management & gate controls.
  • Washlink Systems VFD Motor Control Center with built in tunnel controller, custom designed especially to Quick & Clean’s specifications.
  • Custom designed RFID tags with Quick & Clean logo.

     Two Unitec Sentinel pay stations in the two left lanes and the right lane is RFID only

Washlink Systems appreciates Quick & Clean’s owner Linda and staff, Jasen, Amanda and Jessica in trusting us and our state of the art automated car wash equipment in their new and beautiful car wash. We also like to thank Wade and Jim of Automate located in Park City, Utah for help with the installation.